Bottle-Matic Label Applicators
Bottle-Matic bottle labelers enable you to label all kinds of products by simply inserting the container and depressing a foot-switch. Labels are applied at over 4.5” per second – most water bottles are labeled in less than two seconds. The operator then removes the bottle and inserts another to start the procedure again. These automated labeling systems make it easy to label wine bottles, craft beer bottles, water bottles and most other round products.
The Bottle-Matic has been developed to apply 1 or 2 labels (front & back) to a wide range of cylindrical containers including Bottles, Jars, Cans, Tubs and Tubes and is easily adapted to work with tapered, ridged & odd shaped containers.
Easy to set up and operate, making them an economical solution to relatively short runs and bespoke labelling.
The Bottle-Matic I is designed to apply 1 label to containers from a small patch to fully wrap around.
The Bottle-Matic II is an advanced model with the provision to apply 1 or 2 labels from the same roll, with a built in incremental dial to accurately space front and back labels on the same container.
Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.
Available Documents
Bottle-Matic EN SpecificationAlpha Quadro Label Applicator
The right label at the right time
View ProductLabelling Applicator Options
Weber Label applicators offer numerous labelling options: Change of format The label dispensing head is quick to replace (approx. 30 seconds), with our optional Quick-Change system. This means that our label printing dispensers are equipped for the most varied of present and future labelling requirements – a system for many applications. Labelling from all sides […]
View ProductWeber Alpha HSM Label Applicator
The Alpha HSM (High Speed Modular) is our new modular compact Labelling System designed with versatility in mind.
View ProductWeber Legi-Air 4050E – Precision Labelling System
Based on a modular construction the Weber 4050E is capable of numerous methods to print and apply a label. The design comprises a feeder module, a printing module, label winder and unwinder with numerous applicator types. The standard Tamp-Blow system has a quick-change system for changing the tamp pad which significantly reduces the changeover time to other label formats.
View Product
