Geset labelling machine – Geset 300

Geset 300 labelling machine for fast single side or all-round labelling

The basic concept of the Geset 300 labelling machine is based on two-sided labelling of moulded bottles without the use of run around text blocks. Adaptation to a specific product is done by simple adjustment of the machine components.

Label dimensions: up to 250 mm high
Clock frequency: up to 250 /min

The alignment and therefore highly accurate positioning of the labels is achieved through transport.

Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.

Available Documents

Markoprint NonStop Printing

To enable continuous marking in ongoing production, our Markoprint NonStopPrinting printhead holds two alternately printing cartridges. Because the other ink cartridge is printing on the same position, each ink cartridge can be changed, cleaned, or serviced without pausing the machine.

An intelligent automatism prevents both cartridges from going empty at the same time. The first cartridge will always print two consecutive print jobs, taking turns with the second cartridge, which will only print one. This sophisticated automatism avoids both cartridges from running out at the same time. This will keep the ink from drying out in both cartridges. When the cartridge with the larger print volumes is empty, a warning will show, and the other cartridge will continue printing until it is replaced. The new cartridge will print the lower quantities to allow for you to replace the “older” cartridge. A sophisticated workflow that will boost your efficiency and productivity.

View Product

Weber LA 4050AC Shuttle

On Print and Apply Systems it is often the print module which determines the working rate. This is not the case with the new Legi-Air 4050 AC Shuttle. A loop device ensures a ready supply of labels which are custom-printed before being dispensed at unusually high speeds onto the passing products. The capacity of […]

View Product

Code & Apply

“Code & Apply” extends the possibilities: the LA 4050 delivers tags in a single automatic process quickly and precisely, thanks to reliable pneumatic technology from Festo combined with vacuum and pressure measurement. Potentially defective tags can be rejected by using the optional “Bad Tag Reject” unit.

View Product